BOTM: AU.P.A Cyclocross - part 4
29. Feb ’16
General
And here finally it comes: The spec list of February's BOTM. I built this bike, was desperate to ride it, but never had a chance to do so. I drove it in my Van to Spain…I brought it back from Spain…thought I have it in the office for a while and was ready to go for a ride. But one of our close by dealers had a customer that wanted to see it. Ok gone again. Then I had another customer that wanted to test ride it. Finally I got it back to the office but two days later I got a call from Gerard saying it has to be shipped to Czech Republic and from there to Taiwan…It gets further and further away from my "bump". I'm a really frustrated even more that I do like that color a lot….
| Component | Model |
|---|---|
| Frame: | UP Large |
| Fork: | 3T Luteus Team, 15mm axle. |
| Headset: | Cane Creek |
| Seat clamp: | Open |
| Brakes: | Sram Force 1 |
| Disk rotors: | Sram 160mm |
| Shifters: | Sram Force CX1 |
| R/Derrailleur: | Sram Force CX1 |
| F/derailleur: | No |
| Cassette: | Sram PG 1170 11-32 |
| Cranks: | Sram Force CX1, 175mm |
| Chainguide: | No |
| Chainring: | SRAM 38T |
| Chain: | Sram |
| Grip-Bartape: | Fizik |
| Bars: | ENVE Road Bar |
| Stem: | ENVE Road Stem, 110mm |
| Seatpost: | ENVE 2Bolt, 27.2 |
| Saddle: | Fizik Antares 00 carbon rails |
| Front rim: | AX lightness, tubular |
| Front hub: | DT Swiss 180 |
| Rear rim: | AX lightness, tubular |
| Rear hub: | Tune Kong |
| Front tyre | FMB 33 |
| Rear tyre: | FMB 33 |
| Font Skewer: | 3T 15mm |
| Rear skewer: | Syntace X12 |
| Weight: | 7.1kg |