BOTM: Hard(tail)-wired part 3
30. Jan ’16
General
And here comes the last bit of information for this months BOTM. Here are the specs of our wired 1.1 Snow-white beauty. One remark: if you think the gear range is not enough for you then you can built that bike also with a SRAM 10-42 Cassette. Obviously you would need to change to a wheel with an XD-body also. Not something that you would see in either a SRAM or a Shimano Spec guide but like that- if you are an electronic DI2 fan- you get the best of both worlds
Component | Model |
---|---|
Frame: | O-1.1. Medium |
Fork: | RockShox RS-1 100mm travel, hydraulic remote lock |
Shock: | No |
Headset: | Rotor |
Seat clamp: | Open |
Brakes: | Shimano XTR Race |
Disk rotors: | Ashima, 160mm |
Shifters: | Shimano XTR DI2 |
R/Derrailleur | Shimano XTR DI2 |
F/derrailleur | No |
Cassette: | Shimano XTR 11-40 |
Cranks: | Rotor 3d+ OPEN Special edition |
Chainguide: | No |
Chainring: | Rotor Qrings 30T |
Chain: | Shimano XTR |
Grip-Bartape: | ESI Chunky |
Bars: | 3T Flat 740 Team Stealth |
Stem: | 3T MTB Team Stealth 85mm |
Seatpost: | 3T O-offset Team Stealth, 27,2mm |
Saddle: | Fizik Tundra 2 carbon rails |
Front rim: | Stans Notubes Crest |
Front hub: | Tune Princess Skyline PS |
Rear rim: | Stans Notubes Crest |
Rear hub: | DT Swiss 180 Ceramic, 10x135 |
Front tyre | Schwalbe Racing Ralph 29x2.1 LS EVO PACE |
Rear tyre: | Schwalbe Racing Ralph 29x2.1 LS EVO PACE |
Font Skewer: | Maxle Predective Steering |
Rear skewer: | Dt Swiss RWS |
Extras: | Electronic XTR di2 display |
Weight: | 8.8kg |