BOTM: Hard(tail)-wired part 3
30. Jan ’16
General
And here comes the last bit of information for this months BOTM. Here are the specs of our wired 1.1 Snow-white beauty. One remark: if you think the gear range is not enough for you then you can built that bike also with a SRAM 10-42 Cassette. Obviously you would need to change to a wheel with an XD-body also. Not something that you would see in either a SRAM or a Shimano Spec guide but like that- if you are an electronic DI2 fan- you get the best of both worlds
| Component | Model |
|---|---|
| Frame: | O-1.1. Medium |
| Fork: | RockShox RS-1 100mm travel, hydraulic remote lock |
| Shock: | No |
| Headset: | Rotor |
| Seat clamp: | Open |
| Brakes: | Shimano XTR Race |
| Disk rotors: | Ashima, 160mm |
| Shifters: | Shimano XTR DI2 |
| R/Derrailleur | Shimano XTR DI2 |
| F/derrailleur | No |
| Cassette: | Shimano XTR 11-40 |
| Cranks: | Rotor 3d+ OPEN Special edition |
| Chainguide: | No |
| Chainring: | Rotor Qrings 30T |
| Chain: | Shimano XTR |
| Grip-Bartape: | ESI Chunky |
| Bars: | 3T Flat 740 Team Stealth |
| Stem: | 3T MTB Team Stealth 85mm |
| Seatpost: | 3T O-offset Team Stealth, 27,2mm |
| Saddle: | Fizik Tundra 2 carbon rails |
| Front rim: | Stans Notubes Crest |
| Front hub: | Tune Princess Skyline PS |
| Rear rim: | Stans Notubes Crest |
| Rear hub: | DT Swiss 180 Ceramic, 10x135 |
| Front tyre | Schwalbe Racing Ralph 29x2.1 LS EVO PACE |
| Rear tyre: | Schwalbe Racing Ralph 29x2.1 LS EVO PACE |
| Font Skewer: | Maxle Predective Steering |
| Rear skewer: | Dt Swiss RWS |
| Extras: | Electronic XTR di2 display |
| Weight: | 8.8kg |